Furuno FELCOM501 Operator's Manual page 168

7. MAINTENANCE AND TROUBLESHOOTING
Symptom
Cannot make external
call.
Cannot make internal
call.
Cannot use the inter-
net.
The printing of the fax
is wavy.
Takes lot of time to
communicate with
fax.
7-4
• Check telephone number.
Land subscriber: [00], country code, tel. no.
Ship subscriber: [00], [870], (ocean area code), Inmarsat no.
• Check if the IP Handset cable is properly connected to the Communica-
tion Unit.
• Check if the IP Handset screen shows the green
bar.
• Wait a while, and retry.
• In the Web interface, click [Admin] → [Telephony Settings] → [Phone
List] to confirm that " " appears in the [Ext. Call] field.
• Check if the [Caller code] and [Call Filter] field for the IP Handset (or
phone) of [Admin] → [Telephony Settings] → [Phone List] does not have
" ".
• Check that the IP Handset and/or analog phone cables are properly con-
nected to the Communication Unit.
• Access the Web interface, and click [Admin] → [Telephony Settings] →
[Phone List] to confirm the [Ready] field for the IP Handset appears the
blue icon .
• Access the Web interface from the PC you want to use for internet acess
and check that the Dashboard shows "Connected" in the [Data] field.
• Check internet connection settings on the PC.
• Check the TCP/IP settings for the PC are correct.
• Access the Web interface, and click [Home] → [WAN User List] to confirm
that the PC (IP address) using the Internet is registered in the WAN
group.
• Access the Web interface, and click [Admin] → [Network Settings] →
[WAN] → [Groups] to confirm that "Firewall", "DNS Filter", and "IP Filter"
are set correctly.
Put anti-vibration material under the fax to reduce the vibration.
Activate the safety communication mode on FAX-2840, referring to the op-
erator's manual of the fax.
Remedy
icon on the status