Furuno FELCOM501 Operator's Manual page 142

6. SETTINGS ON WEB INTERFACE
5. Click the [Next] button.
6. Referring to the following table, set up the LAN port and select a service name.
Item
Connection Type
Group Name
Port
Data connection
service
Header Compres-
sion
Prev button
Next button
7. Click the [Next] button.
6-32
Shows the registered connection type.
Shows the registered group name.
Select LAN port from [LAN1], [LAN2], [LAN3], and [LAN4].
LAN port in use appears in gray.
Select the service to use from "Standard Data", "Streaming
8kbps", "Streaming 16kbps", "Streaming 32kbps", "Streaming
64kbps", "Streaming 128kbps", "Streaming 256kbps"*.
*: FELCOM501 only
Put a [ ] in the box to activate the header compression.
Compress the header area of the communication protocol, and re-
duce the communication volume.
Return to the previous step while keeping the setting information.
Go to the next step.
Description