Lan Settings; How To Set Up The Network - Furuno FELCOM501 Operator's Manual

6. SETTINGS ON WEB INTERFACE
6.6

LAN Settings

The LAN Settings must be performed by the network manager.
Note: After making any changes to network settings, conduct a ping test for the net-
work address and broadcast address and check that there is no packet amplification.
6.6.1

How to set up the network

1. Referring to section 6.1, login as an Administrator.
2. Click [Admin] in the menu bar.
3. Click [Network Settings].
4. Click [LAN].
5. Click [Basic Settings] to show the [Basic Settings] menu.
6. Referring to the table below, set up the network.
Item
Own IP Address
IP Address
Subnet mask
DHCP Server
Lease information
button
Use / Unuse
Lease range
Lease duration
Alive monitoring
Enable/Disable
Ping server ad-
dress
6-12
Input the LAN IP Address (IPv4 Address).
Select the LAN subnet mask.
Go to the DCHP lease information screen.
Use: Use DHCP server in the Communication Unit.
Unuse: Do not use DHCP server.
Input the assigned start IP address (IPv4 address).
Input the assigned end IP address (IPv4 address).
Input the lease duration (1 to 9999).
Enables or disables the live connection monitoring function.
To enable the function, check ([ ]) the box at [Enabled].
When enabled, an ICMP request sent from a device connected to
the Communication Unit will receive a reply if internet connection
is available.
Input the ping server address for ICMP requests (IPv4 address).
Description