Trunk Access; Direct Trunk Access; Mco Trunk Access - Panasonic DBS-576HD Technical Manual

Section 700 - Operation

Trunk Access

Description
The System supports the following ways to seize an idle trunk to make an outside call:
•

Direct Trunk Access

•

MCO Trunk Access

Direct Trunk Access
Extensions can seize a specific trunk for outgoing calls. Extensions can also use Direct Trunk Access
to test trunks or to access data trunks.
Operation
To use Direct Trunk Access:
1. Lift the handset or press the ON/OFF key.
2. Enter the Direct Trunk Access code (default = 88).
3. Enter the desired trunk number.
4. Dial the phone number.
Hardware Requirements
• N/A
Related Programming
• FF1-0-03: Extension COS (Direct Trunk Access)
• FF3: Extension COS
Considerations
• N/A
MCO Trunk Access
The System supports up to 5 MCO groups for each MCO tenant group. You can seize an idle trunk
from the MCO trunk group by entering the MCO access code.
Operation
To seize an idle trunk:
1. Lift the handset or press the ON/OFF key.
576-50-700
Action
Action
DBS 576 (USA) issued September 2001
Chapter 6. DSLT Features
Result
Outside dial tone
Result
Intercom dial tone
6-51