Message Waiting/Callback - Panasonic DBS-576HD Technical Manual

Section 700 - Operation
Operation
To automatically redial the last number dialed:
1. Lift the handset or press the ON/OFF key.
OR...
Enter a trunk access code.
2. Press the REDIAL key.
3. Complete the call and replace the handset or press the ON/
OFF key.
Hardware Requirements
• N/A
Related Programming
• FF1-0-03: Extension COS (Intercom Redialing)
• FF3: Extension COS
Considerations
• Extension Class of Service (COS) determines whether Last Number Redial can be used for both
intercom and CO calls, or CO calls only.

Message Waiting/Callback

Description
If you try to call an extension that is busy or does not answer, you can leave a message wait indication
at that extension, requesting a return call.
Operation
To leave a message waiting indication:
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number.
3. While the telephone is still ringing, or when you hear the
busy tone, enter the Message Wait Set code (default = 4).
4. Replace the handset or press the ON/OFF key.
576-50-700
Action
Action
DBS 576 (USA) issued September 2001
Chapter 6. DSLT Features
Result
Outside dial tone (if trunk access code
entered)
Result
Intercom dial tone
Ring or busy tone
Message lamp flashes at called extension
6-35