Panasonic DBS-576HD Technical Manual page 83

Section 700 - Operation
4. Press REDIAL and 74nnnn (VM Transfer Key 1) where
nnnn is the voice mail extension number
or
Press REDIAL and 75nnnn (VM Transfer Key 2) where
nnnn is the voice mail extension number
8. Press the HOLD key.
9. Replace the handset or press the ON/OFF key.
To use a Voice Mail Transfer key:
1. Lift the handset or press the ON/OFF key to answer the
incoming call.
2. Press the VM/TRF (1 or 2) key.
3. Press the DSS/BLF key, dial an extension number or select
the extension from the extension directory on the large dis-
play telephone.
4. Replace the handset or press the RELEASE, ON/OFF, or
PROG key.
Once a call is sent to the voice mail, after the voice mail answers, the system sends the VM Transfer
ID 1 or 2 + the extension number (BLF/DSS, Directory or dialed number).
Hardware RequirementsN/A
• N/A
Related Programming
• FF4 (FF Key Programming): FF Key Assignments
• FF1-0-24: Voice Mail Transfer ID Code
Considerations
• The VM/TRF key can be assigned to any key phone, DSS/72 or EM/24. The VM/TRF key
cannot be assigned to a one-touch key.
• The VM/TRF key can be used to transfer intercom as well as CO calls to a voice mailbox.
• The Voice Mail Transfer ID codes are assigned in the Maintenance Programming section. Up to
ten digits can be stored.
• The system responds to key operations during the transfer in the following ways:
• Pressing the FLASH key cancels the VM/TRF and returns intercom dial tone to the
user. When the VM/TRF is cancelled, the incoming call is still connected but is on
hold.
• If a valid key (CO key or second DSS key, for example) is pressed, the VM/TRF is
cancelled and the operation invoked by the key is performed.
576-50-700
Action
Action
DBS 576 (USA) issued September 2001
Chapter 3. System Features
Result
Result
Connected to caller
System places caller on hold
3-65