Chapter 5. Key Telephone Features
3. Enter OHVA feature access code (default = 8) and
announce the call to be transferred.
4. If transfer is:
• Not accepted, retrieve the call by pressing the associ-
ated flashing MCO key (if an appearing call) or by
pressing the HOLD key (if a non appearing call).
• Accepted, and On-hook Transfer is enabled for your
extension, replace the handset or press the ON/OFF
key.
If On-hook Transfer is not enabled for your extension,
press the PROG key (or RELEASE key if using DSS/
72).
To reply to off-hook voice announcement with a text message:
1. Press the MSG key.
2. Enter the Reply Text Message number (1-9, 0). See Table 6
on page 5-67 for the text message replies.)
To answer a call after it has been announced using the OHVA:
1. Replace the handset.
2. Lift the handset or press the ON/OFF key.
Hardware Requirements
•
N/A
Related Programming
•
FF1 0 03: Extension COS OHVA Originate
•
FF1 0 03: Extension COS OHVA Receive
•
FF3: Extension COS Assignments
•
FF4: FF Key Assignments
Considerations
•
The held call is transferred as soon as the extension sending the OHVA hangs up.
•
If the transferred call is not answered immediately, it will queue for a set time limit, then return
to the extension sending the OHVA by transfer recall timer.
•
You cannot receive a Call Waiting message during an OHVA.
5-68
Action
Action
Action
DBS 576 (USA) issued September 2001
Section 700 - Operation
Result
Result
The text message reply appears on the
camped on telephone display.
Result
Your extension rings
576-50-700