Panasonic DBS-576HD Technical Manual page 207

Section 700 - Operation
To link multiple SSD numbers to a PSD bin:
1. Determine the SSD bin numbers to be linked
2. Lift the handset or press the ON/OFF key.
3. (A) Press the PROG key.
(B) Press the AUTO key.
OR...
(A) Enter the Speed Dial Set/Clear code (default = 710).
4. Enter the PSD bin number (80-90).
5. Press the AUTO key.
6. Enter the SSD bin number (00-79 or 000-799) that contains
the first part of the number to be dialed.
7. Repeat steps 5-6 up to 5 more times for all additional SSDs
to be dialed.
8. Press the HOLD key when finished.
To use a PSD Key that links multiple SSDs:
1. If necessary, select the trunk group (9, 81-84). (Normally
the trunk is selected by the speed dial numbers.)
2. Press the PSD key.
To manually link speed dial keys together:
1. Lift the handset or press the ON/OFF key.
2. If necessary, access an outside line.
3. If you are using a PSD number, press the one-touch key for
the first part of the number.
If you are using an SSD number, press the AUTO key, then
enter the SSD bin number.
4. Use the one-touch keys or press the AUTO key and enter
the SSD codes to dial the parts of the phone number until it
is completed.
Hardware Requirements
• N/A
576-50-700
Action
Action
Action
DBS 576 (USA) issued September 2001
Chapter 5. Key Telephone Features
Result
Enter Spd Dial displays
Stored PSDXXX displays
Result
Result
Intercom dial tone
5-83