Panasonic DBS-576HD Technical Manual page 117

Section 700 - Operation
Operation
To set SSD index using either a large-display or small-display phone:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 4-3.)
2. At the 81 level, enter 02.
3. Press the HOLD key.
4. Enter 2.
5. Press the HOLD key.
6. Press the HOLD key.
7. Enter the SSD Index number (1 - 2).
8. Press the HOLD key.
9. Enter the SSD Index name:
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
4-19.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 4-20.)
Note: Press the FLASH key to clear any existing data.
10. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-display phone on page 4-19.
• See Example 2. Small-display phone on page 4-20.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
11. Repeat steps 9-10 as many times as necessary to enter the
desired SSD name.
Note: Press the FLASH key to clear the entire entry.
12. Press the HOLD key to store the entry.
13. To set additional SSD index names, press the volume up or
down key or press the HOLD key to move to the desired
SSD.
14. Repeat steps 9-13 until all SSD indexes are entered.
576-50-700
Action
DBS 576 (USA) issued September 2001
Chapter 4. User Maintenance
Result
81-
User MAINT displays
8102-
SSD Assignment displays
2 :
SSD Index displays
Enter Index # displays
A B C D E F XXX displays (where
XXX = SSD bin number)
Next SSD index number displays
Desired SSD index number displays
4-33