Panasonic DBS-576HD Technical Manual page 163

Section 700 - Operation
To call a Primary Directory Number extension (NPDNs not called):
1. Lift the handset or press the ON/OFF key.
2. Dial the Direct Call to PDN access code (default = 766).
3. Dial the extension number.
To transfer a call to the Primary Directory Number extension (NPDNs not called):
1. Place the current call on hold.
2. Dial the Direct Call to PDN access code (default = 766).
3. Dial the extension number.
4. If desired, wait until the PDN Extension answers and intro-
duce the call.
5. Hang up.
To set Call Forwarding All, Busy, or No Answer for a PDN from an NPDN or PNPDN:
1. Press an NPDN (or PNPDN) key.
2. Dial the access code for Call Forwarding (Direct = 721),
(Busy = 722), (No Answer = 723).
3. Dial the Call Forward Destination extension number.
Note: FF1-0-03: NPDN and PNPDN Call Forwarding Programming Address
Hardware Requirements
• N/A
Related Programming
• FF4-0-: FF Keys (PDN and NPDN Assignment)
• FF1-2-01: Dial Plan (PDN/Extension Numbers)
Considerations
• A DN can be assigned as a member of a hunt group.
• DNs are not available for ISDN S-Point, pilot numbers of hunting groups, Voice Mail, ACD,
API and for the Attendant group.
• A PDN must be assigned to a telephone before a corresponding NPDN can be used.
• TRS Class and ARS Routing is determined on an extension port basis regardless of the DN
accessed.
• Busy Override is available to the PDN conversation, but not available to the NPDN conversation.
576-50-700
Action
Action
Action
DBS 576 (USA) issued September 2001
Chapter 5. Key Telephone Features
Result
Intercom dial tone
The first available PDN key lights.
Result
Intercom dial tone
Dialed number displays
Result
Intercom dial tone
Dialed number displays
5-39