Set Text Message Replies - Panasonic DBS-576HD Technical Manual

Section 700 - Operation

Set Text Message Replies

Description
This menu item specifies reply text messages.
Operation
To set Text Message Replies using either a large-display or small-display phone:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 4-3.)
2. At the 81 level, enter 11.
3. Press the HOLD key.
4. Enter 1.
5. Press the HOLD key.
6. Press the HOLD key.
7. Enter the Message number (0-9).
8. Press the HOLD key.
9. Enter the Text Message (up to 15 characters):
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
4-19.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 4-20.)
Note: Press the FLASH key to clear any existing data.
10. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-display phone on page 4-19.
• See Example 2. Small-display phone on page 4-20.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
11. Repeat steps 9-10 as many times as necessary to enter the
desired Text Message.
Note: Press the FLASH key to clear the entire entry.
12. Press the HOLD key to store the entry.
576-50-700
Action
DBS 576 (USA) issued September 2001
Chapter 4. User Maintenance
Result
81-
User MAINT displays
8111-
Text Message displays
8111-1:
Reply Message displays
Enter Msg # displays
A B C D E F X
displays (where X = Reply Text Mes-
sage number)
Next message number displays
4-37