Releasing The Inner Rail - Supermicro SuperServer SYS-521E-WR User Manual

Releasing the Inner Rail

The inner rail must be separated from the outer rail before being installed onto the chassis.
Releasing the Inner Rail
1. Pull the inner rail out of the outer rail until it is fully extended as illustrated below.
2. Press the locking tab down to release the inner rail.
3. Pull the inner rail all the way out
Rail Assembly
1
2
3
Figure 2-2. Releasing the Inner Rail
25
Chapter 2: Server Installation
Extending the Rails
Quick-Release
Tab
Separating the Inner
Rail Extension
F.
SCREW
1
2
SCREW
screw the
outer rails
purpose if