General Description And Purpose - Raider RD-T10 User Manual

GENERAL DESCRIPTION AND PURPOSE

List of components
1. Start / stop lever
2. Handle clutch
3. Start switch
4. Height adjustment lever
5. Console with steering wheel for exercise
6. Tires
7. Supporting leg
8. Manual starter
9. Gas faucet
10. Suction
11. Headlamp
12. Tank cap
Purpose.
The cultivator is designed for various agricultural and garden work. It is suitable for
cultivation of normal, sandy and clay soils with a slope of less than 10 °. For rice
with a depth of water layer no more than 250 mm to the healthy layer. In weeds and
deep roots, clear the arable land before using the cultivator.
This cultivator is designed to guarantee the safety of its operation and maintenance if
operated in accordance with these instructions. Read and make sure you understand the
operating instructions before use. The machine must be used and serviced by persons
over 18 years of age, trained to work with it and pre-instructed in safe and healthy working
conditions.
Never switch the cultivator indoors. Ensure good ventilation for the risk of exhaust gas
poisoning.
The rotating parts rotate at high speed and cut. Accidental contact can lead to serious
injuries and lasting damage to your health. Keep your hands and toes away from rotating
parts when the engine is running. Prior to inspection or maintenance, stop the engine
and release the metal brackets on the protective grille. Disconnect spark plugs to prevent
accidental start-up. Use gloves to protect hands from burning.
13. Console screw
14. Speed lever / 2-front, 1-rear /
15. Gas lever
25