Raider RD-T10 User Manual page 36

36 www.raider.bg
Changing gears:
1. Release the gear lever (pos. 1, fig. 18) to the position (pos. N, fig. 18) to exclude from
the selected speed.
2. Return the throttle lever to the minimum engine speed position.
3. Set the gear lever to the desired gear position.
When the lever (pos. 1, fig. 17) is released into position (pos. 3, fig. 17), the clutch is
switched off and the movement is not transmitted to the lower axis. (1) clutch lever - (1);
(2) included; (3) off.
Use of drawbar console.
1. Insert the coupling pin into the drawbar to attach the device you have selected for use
with the cultivator (plow, harrow, cultivator, trailer or other attachment).
Tips for working.
Adjust the handlebar to a comfortable position (your waist height for normal operation).
If the machine is to be pushed forward while lifting at great depth, lift the handlebar
upwards. If the machine does not move forward when pushing, move the steering wheel
left and right.
Turn: The correct way to make a turn while operating the machine is to center the center of
gravity towards the back and then make a bend. This will lead to an easy turn.