Raider RD-T10 User Manual page 34

34 www.raider.bg
As the engine warms up, gradually put the suction cup (pos. 1, fig. 14) in the open (working)
position.
HIGH LEVEL OF CARBURETOR OPERATION
At high engine speeds (maximum engine speeds), the carburetor's standard fuel-air
mixture will be extremely high and fuel consumption will increase.
The carburetor is regulated by the manufacturer to supply a normal fuel-air mixture over
the entire operating range from minimum to maximum load (from minimum to maximum
engine speed).
CAUTION: Operating the machine to a degree other than that for which the carburetor is
regulated can result in reduced performance, overheating, and serious engine damage.
OPERATION OF THE MOTOCULTIVATOR.
Steering height adjustment.
CAUTION: Before adjusting the rudder, place the cultivator on a level surface to avoid an
accident.
To adjust the handlebar height, unscrew the handle (key 1, figure 15), select the
appropriate holes and tighten the handle (key 1, figure 15) again.
(1) Suction lever;
(2) OPEN - ON opened.
(1) Handle
Adjusting for milling
depth.
Insert the
stop (stop) into the
drawbar.
Depth adjustment:
Pull out the stop pin
(pos. 5, fig. 16) and
slide the stop pin
(pos. 4, fig. 16) up or
down if necessary.
work