General Guidelines For Safe Operation - Raider RDP-AG63 User Manual

www.raider.bg
14

GENERAL GUIDELINES FOR SAFE OPERATION

Read all instructions carefully. Failure of the nature following instructions can cause electric shock, fire and / or
severe injuries. Keep these instructions in a safe place.
1. Safety in the workplace.
1.1. Keep your workplace clean and well lit. Disarray and poor lighting may contribute to the occurrence of an
accident.
1.2. Do not operate in an environment of grinding increased the risk of explosion, close to flammable liquids,
gases or powders.
During operation of the separate grinding sparks that can ignite powders or fumes.
1.3. Keep children and bystanders at a safe distance while working with angle grinders.
If your attention is diverted, you may lose control over grinding.
2. Safety when working with electricity.
2.1. Plug the grinding must be suitable for contact. In no case is allowed to modify the structure of the plug.
When working with electrical zero, do not use plug adapters.
Using original plugs and sockets reduces the risk of electric shock.
2.2. Avoid touching your body to earthed bodies, for example pipes, heaters, stoves and refrigerators. When
your body is grounded, risk of electric shock is greater.
Keep grinding from rain and moisture.
Infiltration of water into the grinding increases the risk of electric shock.
2.3. Do not use a power cord for the purposes for which it is not provided, for example to carry grinders for
cable or removing the plug from the outlet. Protect cords from heat, oil and contact with sharp edges or points
of mobile machines.
Damaged or twisted cables increase the risk of electric shock.
2.4. When you work with the angle grinder out, switch the machine only in installations equipped with electric
switch "Fi" RCD (Residual Current Device). RCD must be no more than 30 mA. Use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
2.5. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
Using the extension, designed for outdoor use reduces the risk of electric shock.
3. Safer way of working.
3.1. Be concentrated, watch their actions carefully and act cautiously and prudently. Do not use the angle grinder
when you are tired or under the influence of drugs, alcohol or narcotic drugs.
A moment of distraction at work grinding may have the effect of extremely serious injuries.
3.2. Work with protective work clothing and always with safety glasses.
Wearing Suitable for grinding and the activities of personal protective equipment, such as respiratory masks,
healthy, tightly closed shoes grapple with a stable, protective helmet and silencers (hearing protectors), reduces
the risk of accident.
3.3. Avoid the danger of incorporating the grinding inadvertently. Before you turn the plug into the power
supply network, make sure the trigger switch is in position "off". If you wear when grinding, keep your finger on
the trigger switch, or if you submit a voltage of grinding when turned on, there is the risk of accident.
3.4. Before you turn implies that we are sure you remove all of its utilities and wrenches.
Utilities, forgotten rotating unit can cause injuries.
3.5. Avoid unnatural positions of the body. Work in a stable position of the body at any time and keep the