HPE ProLiant DL20 Gen10 User Manual page 5

4.14 Expansion card options
4.14.1 PCIe expansion slot population rules
4.14.2 Installing an expansion board
4.15 Installing the FlexibleLOM adapter
4.16 Transceiver option
4.16.1 Transceiver warnings and cautions
4.16.2 Installing a transceiver
4.17 Chassis intrusion detection switch option
4.17.1 Installing the chassis intrusion detection switch
4.18 HPE Trusted Platform Module 2.0 Gen10 option
4.18.1 Overview
4.18.2 HPE Trusted Platform Module 2.0 guidelines
4.18.3 Installing and enabling the HPE TPM 2.0 Gen10 option
4.18.3.1 Installing the Trusted Platform Module board
4.18.3.1.1 Preparing the server for installation
4.18.3.1.2 Installing the TPM board and cover
4.18.3.1.3 Preparing the server for operation
4.18.3.2 Enabling the Trusted Platform Module
4.18.3.2.1 Enabling the Trusted Platform Module as TPM 2.0
4.18.3.2.2 Enabling the Trusted Platform Module as TPM 1.2
4.18.3.3 Retaining the BitLocker recovery key/password
5 Cabling
5.1 Cabling guidelines
5.2 Storage cabling
5.2.1 Non-hot-plug drive cabling
5.2.2 Hot-plug drive cabling
5.2.2.1 Two-bay LFF hot-plug drive cabling
5.2.2.2 Four bay SFF hot-plug drive cabling
5.2.2.3 4+2 bay SFF hot-plug drive cabling
5.2.3 M.2 SATA SSD cabling
5.3 Energy pack cabling
5.4 Controller backup power cabling
5.5 Optical drive cabling
5.6 Fan cabling
5.7 Chassis intrusion detection switch cabling
5.8 Serial port cabling
5.9 Power supply cabling
6 Software and configuration utilities
6.1 Server mode
6.2 Product QuickSpecs
6.3 Active Health System Viewer
6.3.1 Active Health System
6.3.1.1 Active Health System data collection
6.3.1.2 Active Health System Log