HPE ProLiant DL20 Gen10 User Manual page 108

13. Install the M.2 SSD/dedicated iLO/serial port enablement board:
a. Insert the enablement board into the M.2 SSD slot at a 45° angle.
b. Carefully press the enablement board down to the horizontal position.
c. Install the enablement board screw.
14. Perform the action corresponding to the enablement feature you require:
Install an M.2 NVMe SSD .
Install the serial port cable .
15. Install the riser cage.
16. Install the M.2 air guider.
Installing the M.2 SSD/dedicated iLO/serial port enablement board 108