Table of Contents
Advertisement
5
STXPNS001 Parameter Settings
STXPNS001 Parameter
5-14
The following table describes the STXPNS001 parameter settings.
Table 44: STXPNS001: Parameter Setting and Description
Parameter
Word data type
Stop action
Reaction on RSTi Bus error Clear input image
* Default settings
RSTi Network Adapter Manual User Manual -January 2012
Setting
MOTOLORA *
INTEL
Clear output image to 0 *
Hold last valid output image
Depends on IO's fault action
parameters
Hold last image
Auto reset *
Disconnect PROFINET
Description
Big Endian format(MSB-LSB)
Little Endian format(LSB-MSB)
All outputs are set to 0.
All Outputs hold the last valid
output values.
The communication between
STXPNS001 and modules will be
stopped and each module will
control its IO Data according to
the Fault Action selected for it.
The input values are cleared
The input values hold the last
valid values.
STXPNS001 performs reset.
Stop the communication with
Controller.
GFK-2746
Advertisement
Table of Contents
