Table of Contents
Advertisement
1
Wiring of Communication and Power Cable and Installation of the Modules
PROFIBUS Connection cable wiring and Installation
Chapter
1-34
Chapter
Using a small-bladed screwdriver, release the DIN rail locking clip by pulling clip
downward. The clip will click and lock into the open position. Install the module on the
DIN rail firmly. Once module is in place on the DIN rail, push the clip upward to secure the
module on the DIN rail. To remove, pull clip downward until the locking clip clicks and
locks, the module can now be removed from the DIN rail.
Note:
Make sure that the locking clip is in the upward position to ensure the module is
properly grounded and secured to the DIN rail.
RSTi Network Adapter Manual User Manual - January 2012
GFK-2746
Advertisement
Table of Contents
