GE PACSystems RSTi Manual page 90

5
5-12

Names cannot contain any special characters such as umlauts, parentheses,
underscores, forward or backward slashes, empty spaces, and so on. The dash is
the only special character allowed.

Names must not begin or end with the "-" or "." characters.

Names must not have the format n.n.n.n (where n = 0...999).

The device name must not start with numbers.

Names must not begin with the character sequence "port-xyz-" (where x, y, z =
0...9).

If you want to change the IP address in non-volatile memory, please refer to
Configuration section for more details.
Device names are assigned to PROFINET IO device when the device is being set up and
placed in operation for the first time ("commissioned").
The default name is "STXPNS001-SW" (see "Short Designation").
If several devices of the same type are arranged on the same PROFINET IO system, then
PME/ Programing software automatically adds sequential number to the name from the
GSD file. In this case, the second device has the extension "-1", the third one has the
extension "-2", and so on.
■
Communication Speed Setting

Refer to GEIP PROFINET master module settings to change the communication
speed (GE-IP Profinet Controller User Manual- GFK-2571).
RSTi Network Adapter Manual User Manual -January 2012 GFK-2746