Table of Contents
Advertisement
Compare with Offline
How to Compare
GFK-2746
1 Introduction
3. From 'Step 2. Scan', click 'Scan' button.
online only
■
It compares information of node in online with current project.
■
It can compare configuration with parameter.
■
Additionally miscellaneous information provided with
1. Select Network Adapter to be compared in Project window.
2. Use one of the following methods.
Menu
Toolbar
Shortcuts
3. Select 'Parameters' option button in Step 2. Select scope.
4. Click 'Start comparing' in Step 3. Apply.
5. If online and offline are same, "EQUAL" Message Box is displayed.
Otherwise, the result of it is displayed in the monitor.
Note:
If IO Configuration is not identified, comparing parameter does not work properly.
Chapter Chapter
5-55
Online → Compare with Offline
Shift + C
5
Advertisement
Table of Contents
