Using Ioguidepro - GE PACSystems RSTi Manual

Using IOGuidePro

Quick Start
Offline Functions
GFK-2746
1 Introduction
1. Create Project

Create a ne project by selecting "Project File → Ne " from the Edit Menu.

From New project dialog, choose project name, Bus type and file save
location and then click OK.
2. Network configuration

Select network adapter in Edit menu.

From Add Network Adapter Dialog, choose desired network adapter to be
added and setup communication exactly, then click OK.

Configure parameters in parameter tab of main window.
3. IO configuration

Choose "Add Module" in Edit menu.

Choose IO to be added from Add IO Module Dialog.

After choosing IO in project window, set parameter value in parameter tab of
main window.
4. Validation Check

Choose "Check Validation → Project" in Edit menu.

Check error in Validation Result Dialog.
5. Documentation

Choose "Documentation → Project" of file menu in order to make current
project file.

Click "Make Report" in Documentation Dialog.
Chapter Chapter
5-27
5