GE PACSystems RSTi Manual page 131

Add IO Module
How to Add to IO Module
GFK-2746
1 Introduction
Add IO module to the selected NA.
1. Select IO Module to be added to Network Adapter in Project window.
2. Use one of the following methods.
Menu
Toolbar
Shortcuts
3. Double click to add IO Module or Click '>>' to add to NA.
4. Enter a name in User Title form User View.
5. Click 'Show Technical Data' to check Technical Data.
6. Click 'OK' to add IO to NA.
Chapter Chapter
5-31
Edit → Add → Module
Ctrl + M
Figure 58: Add IO Modules window
5