Install The Visualdsp++ License; Install The Ez-Kit Lite Debug Software - Analog Devices ADSP-21161N EZ-KIT LITE Manual

Insert the VisualDSP++ CD-ROM into the CD-ROM drive. If Auto Run is
enabled on your PC, the home screen of the VisualDSP++ install wizard will
automatically appear.
D:\Setup.exe in the Open field, where D is the name of your local CD-ROM
drive. Click on the "Install VisualDSP++" option. This will launch the setup
wizard. Follow the on-screen instructions.

2.4.2 Install the VisualDSP++ License

Before the VisualDSP++ software can be used, the license must be installed.
To install the VisualDSP++ license:
1. Make sure VisualDSP++ has been installed first.
2. Insert the VisualDSP++ CD-ROM into the CD-ROM drive if it is not
already in the drive.
3. Once the CD-ROM browser is on the screen select the "Install License"
option.
4. Follow the setup wizard instructions. (Note: You will need the serial
number located on the back of the CD-ROM sleeve.)

2.4.3 Install the EZ-KIT Lite Debug Software

VisualDSP++ communicates with the EZ-KIT Lite board using the EZ-KIT Lite
debug software. This software is supplied on the EZ-KIT Lite CD-ROM.
To install the EZ-KIT Lite debug software:
1. Make sure VisualDSP++ has been installed first.
2. Close all Windows applications. The install will not work correctly if any
VisualDSP++ applications are running.
3. Insert the EZ-KIT Lite CD-ROM into the CD-ROM drive. If Auto Run is
enabled on your PC, the home screen of the EZ-KIT Lite install wizard
will automatically appear. If not, choose Run from the Start menu, and
enter D:\Setup.exe in the Open field, where D is the name of you local
CD-ROM drive. Click on the "Install EZ-KIT Lite Software" option.
This will launch the setup wizard. Follow this wizard with the on-screen
instructions.
ADSP-21161N EZ-KIT Lite Evaluation System Manual
If not, choose Run from the Start menu, and enter
2-3