Installation Manual
H3C LS8M1WCMA0-OVS Access Controller Module
At this time, the baud rate of the serial interface of the LS8M1WCMA0-OVS card is
modified to 115,200 bps, while that of the terminal is still 9,600 bps. The
LS8M1WCMA0-OVS card and the terminal cannot communicate with each other.
Change the baud rate to 115,200 bps on the terminal.
Perform the following operations on the terminal:
Figure 5-2 Disconnect the terminal
Select File > Properties, and then click Configure... to change the bits per second to
115,200.
Figure 5-3 Modify the baud rate
Select Call > Call to establish a new connection.
Chapter 5 Software Maintenance
5-9