Dealing With Password Loss; User Password Loss - H3C LS8M1WCMA0-OVS Installation Manual

Access controller module

Hide thumbs Also See for LS8M1WCMA0-OVS:

Table of Contents

Installation Manual

H3C LS8M1WCMA0-OVS Access Controller Module

Enter Y to confirm the deletion, and the system prompts that the file is successfully

deleted.

flash:/manuinfo.txt will be deleted ! Continue ? [Y/N]y

Deleting flash:/manuinfo.txt...OK!

IV. Returning to the main menu

Select 0 to return to the BootWare main menu.

5.8 Dealing With Password Loss

When the BootWare password, user password or super password is lost, resort to the

following methods:

If you lose your password, you cannot enter the system. In this case, you can boot the

system by neglecting the system configuration. Perform the following operations:

Step 1: Enter the BootWare main menu, and select 6 to boot the system by ignoring the

system configuration:

The system prompts:

System startup with ignore user's configuration, Yes or No [Y/N]:y

Flag Set Successfully!

The system prompts the setting succeeds.

Step 2: When the BootWare main menu appears again, select 0 to reboot the system.

System starts booting ...

Step 3: Set a new password in system view after reboot.

[H3C]user-interface con 0

[H3C-ui-aux0]authentication-mode password

[H3C-ui-aux0]set authentication password simple 123456

The above information indicates that the password authentication is adopted at the

console interface and the password is set to 123456 and stored in plain text.

Chapter 5 Software Maintenance

5-24

Table of Contents