Table of Contents
Advertisement
Quick Links
Installation Manual
H3C LS8M1WCMA0-OVS Access Controller Module
Chapter 1 Product Overview ........................................................................................................ 1-1
1.1 LS8M1WCMA0-OVS Overview ......................................................................................... 1-1
1.2 LS8M1WCMA0-OVS AC Service Card ............................................................................. 1-1
1.2.1 Specifications .......................................................................................................... 1-1
1.2.2 Panel ....................................................................................................................... 1-2
Chapter 2 Installation Preparation............................................................................................... 2-1
2.1 Safety Precautions............................................................................................................. 2-1
2.1.1 General Instructions ................................................................................................ 2-1
2.1.2 Electrical safety ....................................................................................................... 2-1
2.1.3 Anti-Static Safety..................................................................................................... 2-1
2.2 Installation Site Checking .................................................................................................. 2-2
2.2.1 Requirements on Temperature/Humidity ................................................................ 2-2
2.2.2 Requirements on Cleanness................................................................................... 2-2
2.2.3 Anti-Electromagnetic Interference Requirements ................................................... 2-3
2.2.4 Grounding Requirements ........................................................................................ 2-3
2.3 Installation Tools ................................................................................................................ 2-4
Chapter 3 Installation .................................................................................................................... 3-1
3.1 Console Cable Connection ................................................................................................ 3-1
3.1.1 Console Cable......................................................................................................... 3-1
3.1.2 Connecting the Console Cable ............................................................................... 3-2
3.2 Installation/Removal of an LS8M1WCMA0-OVS............................................................... 3-3
3.2.1 Removing an LS8M1WCMA0-OVS ........................................................................ 3-3
3.2.2 Installing an LS8M1WCMA0-OVS .......................................................................... 3-3
Chapter 4 Initial Startup ................................................................................................................ 4-1
4.1 Setting up the Configuration Environment......................................................................... 4-1
4.2 Connecting the Console Cable .......................................................................................... 4-1
4.3 Setting Terminal Parameters ............................................................................................. 4-1
4.4 Powering On the LS8M1WCMA0-OVS ............................................................................. 4-4
4.4.1 Checking Before Power-On .................................................................................... 4-4
4.4.2 Powering On the LS8M1WCMA0-OVS................................................................... 4-4
Chapter 5 Software Maintenance................................................................................................. 5-1
5.1 Overview ............................................................................................................................ 5-1
5.1.1 Files Managed by the LS8M1WCMA0-OVS ........................................................... 5-1
5.1.2 Software Maintenance Methods of the LS8M1WCMA0-OVS................................. 5-2
5.2 BootWare Menu ................................................................................................................. 5-3
5.2.1 BootWare Main Menu ............................................................................................. 5-3
Table of Contents
i
Table of Contents
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for H3C LS8M1WCMA0-OVS
Summary of Contents for H3C LS8M1WCMA0-OVS
-
Page 1: Table Of Contents
4.4.2 Powering On the LS8M1WCMA0-OVS..............4-4 Chapter 5 Software Maintenance....................5-1 5.1 Overview ..........................5-1 5.1.1 Files Managed by the LS8M1WCMA0-OVS ............5-1 5.1.2 Software Maintenance Methods of the LS8M1WCMA0-OVS......... 5-2 5.2 BootWare Menu ......................... 5-3 5.2.1 BootWare Main Menu ..................... 5-3... - Page 2 5.6 Maintaining Application Program and Configuration Through Command Lines....5-16 5.6.1 Maintaining the LS8M1WCMA0-OVS Through the TFTP Server......5-16 5.6.2 Maintaining the LS8M1WCMA0-OVS Through the FTP Server ......5-18 5.7 Maintaining Application and Configuration Files in BootWare......... 5-22 5.8 Dealing With Password Loss ................... 5-24 5.8.1 User Password Loss .....................
- Page 3 Figure 3-1 Console cable....................... 3-1 Figure 3-2 Remove an LS8M1WCMA0-OVS card ..............3-3 Figure 4-1 Network diagram for initial startup of the LS8M1WCMA0-OVS card ....4-1 Figure 4-2 Connection description interface ................4-2 Figure 4-3 Set the serial interface used for HyperTerminal connection......... 4-2 Figure 4-4 Set serial interface parameters................
- Page 4 List of Tables List of Tables Table 1-1 LEDs........................1-1 Table 1-2 LS8M1WCMA0-OVS specifications ............... 1-2 Table 2-1 Dust concentration limit in the equipment room ............. 2-3 Table 2-2 Limit on harmful gases in the equipment room ............2-3 Table 2-3 Installation tools checking list ................. 2-4 Table 3-1 Console cable pins and mapping relation ..............
-
Page 5: Chapter 1 Product Overview
Chapter 1 Product Overview 1.1 LS8M1WCMA0-OVS Overview LS8M1WCMA0-OVS, the access controller (AC) service card, is applicable to H3C S7502/7503/7506/7506R Ethernet switches. The LS8M1WCMA0-OVS starts to work after it is installed in the corresponding slot of a switch. It is powered by the switch and establishes a 2 GHz bandwidth channel with the switch through its internal interface, so as to realize the wireless control function. -
Page 6: Panel
0°C to 45°C (32°F to 113°F) Relative humidity (noncondensing) 10% to 90% 1.2.2 Panel The following figure illustrates the front panel of an LS8M1WCMA0-OVS (1) Console interface (2) Active LED of 10/100 Base-TX out-of-band management interface (3) 10/100 Base-TX out-of-band management interface... -
Page 7: Chapter 2 Installation Preparation
2.1.1 General Instructions When installing an LS8M1WCMA0-OVS card into a switch, make sure that: The switch chassis is clean and dust-free. Keep the switch chassis and installation tools away from walk areas. -
Page 8: Installation Site Checking
Installation Manual H3C LS8M1WCMA0-OVS Access Controller Module Chapter 2 Installation Preparation Step 3: Insert the grounding terminal of the ESD-preventive wrist strap to the corresponding jack on the switch chassis, or attach it to the grounding screw of the chassis with an alligator clip. -
Page 9: Anti-Electromagnetic Interference Requirements
Installation Manual H3C LS8M1WCMA0-OVS Access Controller Module Chapter 2 Installation Preparation Table 2-1 Dust concentration limit in the equipment room Physical active Concentration limit (particles/m substance Dust ≤ 3 × 104 (No visible dust on the tabletop over three days) Note: The dust particle diameter is ≥... -
Page 10: Installation Tools
Fiber cleaner Dustless paper; optical fiber end-face microscope Multimeter, 500 V megohmmeter (used to measure the Instrument insulation resistance), ground resistance tester Note: The above instruments and tools are not provided with LS8M1WCMA0-OVS service cards. You need to prepare them yourself. -
Page 11: Chapter 3 Installation
A console cable is an 8-core cable. One end of the cable is a crimped RJ-45 connector and is connected to the console port of the LS8M1WCMA0-OVS card. The other end is a DB-9 female connector and is connected to the 9-pin serial port on the console terminal. -
Page 12: Connecting The Console Cable
Step 1: Plug the DB-9 female connector of the console cable to the serial interface of the PC or terminal where the LS8M1WCMA0-OVS card is to be configured. Step 2: Connect the RJ-45 connector of the console cable to the console interface of the LS8M1WCMA0-OVS card. -
Page 13: Installation/Removal Of An Ls8M1Wcma0-Ovs
(the angles thus formed between the panel and the levers are the minimum angles). step 3: Fix the LS8M1WCMA0-OVS card in the chassis by fastening the captive screws. -
Page 14: Chapter 4 Initial Startup
Connect a terminal (a PC in this example) to the console interface on the LS8M1WCMA0-OVS card with a console cable. Figure 4-1 Network diagram for initial startup of the LS8M1WCMA0-OVS card 4.2 Connecting the Console Cable Step 1: Connect the DB-9 female connector of the console cable to the serial interface of the PC where the LS8M1WCMA0-OVS card is to be configured. -
Page 15: Figure 4-2 Connection Description Interface
Installation Manual H3C LS8M1WCMA0-OVS Access Controller Module Chapter 4 Initial Startup Figure 4-2 Connection description interface Type the name of the new connection in the connection description interface and click OK. The system displays the following interface. From the Connect using drop-down list, select the serial interface to be used. -
Page 16: Figure 4-4 Set Serial Interface Parameters
Installation Manual H3C LS8M1WCMA0-OVS Access Controller Module Chapter 4 Initial Startup Figure 4-4 Set serial interface parameters Click OK and the system displays the following interface. Figure 4-5 HyperTerminal window Set HyperTerminal properties. Select File > Properties > Settings in the... -
Page 17: Powering On The Ls8M1Wcma0-Ovs
The console cable is properly connected; the terminal (for example, a PC) used for configuration has been started; the configuration parameters have been set. 4.4.2 Powering On the LS8M1WCMA0-OVS The following is information output by an LS8M1WCMA0-OVS card after it is powered on and started up. *******************************************... - Page 18 Installation Manual H3C LS8M1WCMA0-OVS Access Controller Module Chapter 4 Initial Startup H3C WCM BootWare , Ver 1.08 ******************************************* Copyright(c) 2004-2007 Hangzhou H3C Tech. Co., Ltd. and its licensors. Compiled date : Nov 17 2006, 12:20:43 CPU type : BCM1250 CPU L1 DCache...
- Page 19 <H3C> You can configure the LS8M1WCMA0-OVS card now. Note: H3C LS8M1WCMA0-OVS service cards provide various command views. For detailed information about related configuration commands and command line interfaces, refer to H3C Access controller Operation Manual and H3C Access controller Command...
-
Page 20: Chapter 5 Software Maintenance
5.1 Overview 5.1.1 Files Managed by the LS8M1WCMA0-OVS I. BootWare program file The file is used to boot applications when the LS8M1WCMA0-OVS card is started up. A complete BootWare program file includes two segments: basic and extended. II. Application file WX5002 LS8M1WCMA0-OVS service cards support the Dual Image function. -
Page 21: Software Maintenance Methods Of The Ls8M1Wcma0-Ovs
B, the original type M+B file changes to a file of type M. III. Configuration file The file stores configuration information of the LS8M1WCMA0-OVS card. 5.1.2 Software Maintenance Methods of the LS8M1WCMA0-OVS Upgrade BootWare and application programs using XMODEM protocol through a serial interface. -
Page 22: Bootware Menu
Figure 5-1 BootWare and application programs upgrade flow 5.2 BootWare Menu 5.2.1 BootWare Main Menu When the LS8M1WCMA0-OVS is powered on and reboots, the following information is first displayed on the console terminal: System starts booting ... Then, the system prompts the following: ******************************************* H3C WCM BootWare , Ver 1.08... - Page 23 Installation Manual H3C LS8M1WCMA0-OVS Access Controller Module Chapter 5 Software Maintenance Copyright(c) 2004-2007 Hangzhou H3C Tech. Co., Ltd. and its licensors. Compiled date : Nov 17 2006, 12:20:43 CPU type : BCM1250 CPU L1 DCache : 32KB CPU L1 ICache...
-
Page 24: Bootware Submenus
Installation Manual H3C LS8M1WCMA0-OVS Access Controller Module Chapter 5 Software Maintenance | <6> Ignore System Configuration | <7> BootWare Operation Menu | <8> Clear Super Password | <0> Reboot =========================================================== Enter your choice (0-8): The menu is described in the following table. -
Page 25: Table 5-2 Bootware Serial Submenu
Installation Manual H3C LS8M1WCMA0-OVS Access Controller Module Chapter 5 Software Maintenance Enter your choice (0-5): Items in this submenu are described in the following table. Table 5-2 BootWare serial submenu Menu item Description <1> Download Application Program To Download an application program to SDRAM And Run SDRAM and run the program. -
Page 26: Table 5-4 File Control Submenu
Installation Manual H3C LS8M1WCMA0-OVS Access Controller Module Chapter 5 Software Maintenance Menu item Description <0> Exit To Main Menu Return to the BootWare main menu. III. File control submenu Select 4 in the BootWare main menu to enter the file control submenu. You can view the application file types, modify file names, and delete files through the submenu. -
Page 27: Upgrading Bootware Through A Serial Interface
Installation Manual H3C LS8M1WCMA0-OVS Access Controller Module Chapter 5 Software Maintenance Table 5-5 BootWare operation submenu Menu item Description <1> Backup Full BootWare Backup the full BootWare. <2> Restore Full BootWare Restore the full BootWare. <3> Update Full BootWare With... -
Page 28: Figure 5-2 Disconnect The Terminal
H3C LS8M1WCMA0-OVS Access Controller Module Chapter 5 Software Maintenance At this time, the baud rate of the serial interface of the LS8M1WCMA0-OVS card is modified to 115,200 bps, while that of the terminal is still 9,600 bps. The LS8M1WCMA0-OVS card and the terminal cannot communicate with each other. -
Page 29: Upgrading Bootware
Installation Manual H3C LS8M1WCMA0-OVS Access Controller Module Chapter 5 Software Maintenance Figure 5-4 Re-establish a call connection Then, press the Enter key, and the system will prompt the current baud rate and return to the previous menu. =====================<SERIAL SUB-MENU>===================== | <1> Download Application Program To SDRAM And Run | <2>... -
Page 30: Figure 5-5 Send File Dialog Box
Installation Manual H3C LS8M1WCMA0-OVS Access Controller Module Chapter 5 Software Maintenance | <3> 38400 | <4> 57600 | <5> 115200 | <0> Exit =========================================================== Enter your choice (0-5): For the baud rate modification procedure, refer to section 5.3.1 “Modifying Serial Interface Parameters”... -
Page 31: Figure 5-6 Sending File Dialog Box
Installation Manual H3C LS8M1WCMA0-OVS Access Controller Module Chapter 5 Software Maintenance Figure 5-6 Sending file dialog box After the BootWare program file is downloaded, the following information appears on terminal interface: Download successfully! 434432 bytes downloaded! Updating Basic BootWare ? Yes or No (Y/N):Y Updating Basic BTM Updating the Norm Basic BootWare..Done... -
Page 32: Upgrading An Application Program Through A Serial Interface
5.5.1 Configuring Ethernet Interface Parameters Before upgrading an application program through an Ethernet interface, you need to configure the Ethernet interface of the LS8M1WCMA0-OVS card as follows: Select 3 in the BootWare main menu to enter the Ethernet submenu. Then, select 5 in the submenu to enter the Ethernet interface parameter configuration interface: One protocol for download, tftp. -
Page 33: Upgrading An Application Program
Type the symbol “.” to clear the input, “-” to return to the previous parameter, and “^D” (namely, <Ctrl+D>) to quit from the parameter configuration interface. The LS8M1WCMA0-OVS card can use the 10/100 BASE-TX out-of-band management interface only. 5.5.2 Upgrading an Application Program Trivial File Transfer Protocol (TFTP), a protocol in TCP/IP protocol suite, is used for trivial file transfer between client and server. -
Page 34: Figure 5-7 Set Up A Tftp Upgrade Environment
Start the TFTP server on the PC, and set the TFTP server path to the directory of the application program. Caution: The TFTP server is not provided with H3C LS8M1WCMA0-OVS service cards. You need to purchase and install it yourself. Step 2: Modify Ethernet interface parameters. Refer to section 5.5.1 “Configuring Ethernet Interface Parameters”... -
Page 35: Maintaining Application Program And Configuration Through Command Lines
In this example, the downloaded file main.bin replaces the original type M file and becomes the main application file. Refer to section 5.1.1 “Files Managed by the LS8M1WCMA0-OVS” on page 5-1 for detailed descriptions on file types. -
Page 36: Figure 5-8 Network Diagram For Maintenance Through Command Lines
Configure the IP addresses of the two sides on the same network. For example, the IP address of the TFTP server is set to 192.168.0.1, and that of the LS8M1WCMA0-OVS card is set to 192.168.0.2. You can use the ping command on the server or the LS8M1WCMA0-OVS card to check whether the connection is successful. -
Page 37: Maintaining The Ls8M1Wcma0-Ovs Through The Ftp Server
TCP, but does not provide any access authorization or authentication mechanism. In the FTP service, the LS8M1WCMA0-OVS card can serve as the FTP server. You can run the FTP client to log in to the AC to access files. -
Page 38: Figure 5-9 Network Diagram For Maintenance Of The Ls8M1Wcma0-Ovs Serving As The Server
Configure the IP addresses of the two sides on the same network. In this section, the IP address of the FTP client (PC) is set to 192.168.0.1, while that of the LS8M1WCMA0-OVS is set to 192.168.0.2. You can use the ping command on the server or the LS8M1WCMA0-OVS card to check whether the connection is successful. - Page 39 230 User logged in. connection server succeeded. Now, use the following commands to maintain the LS8M1WCMA0-OVS card. In this example, the main.bin file on the LS8M1WCMA0-OVS card is copied to the PC. ftp> binary Change the transfer mode to binary 200 Type set to I.
- Page 40 Figure 5-10 Network diagram for maintenance of the LS8M1WCMA0-OVS serving as a client The LS8M1WCMA0-OVS card serves as an FTP client, while the PC running FTP server serves as the FTP server. Set the FTP server path and add a username and password for the LS8M1WCMA0-OVS card.
-
Page 41: Maintaining Application And Configuration Files In Bootware
226 Closing data connection; File transfer successful. FTP: 14323376 byte(s) received in 69.256 second(s) 206.00K byte(s)/sec. [ftp]put main.bin main.bin Copy the file from the LS8M1WCMA0-OVS card to the server 200 PORT command successful. 150 File status OK ; about to open data connection 226 Closing data connection;... - Page 42 Installation Manual H3C LS8M1WCMA0-OVS Access Controller Module Chapter 5 Software Maintenance Size(B) Type Time Name 6081128 Oct/28/2006 09:23:30 main.bin 6081128 Oct/28/2006 09:23:30 backup.bin 6081128 Oct/28/2006 09:23:30 secure.bin ************************************************************************** Enter File Name: Enter a full file name, including the extension. For example, after you enter a full file name main.bin and press Enter, the system will prompt you to modify the file type:...
-
Page 43: Dealing With Password Loss
Installation Manual H3C LS8M1WCMA0-OVS Access Controller Module Chapter 5 Software Maintenance Enter Y to confirm the deletion, and the system prompts that the file is successfully deleted. flash:/manuinfo.txt will be deleted ! Continue ? [Y/N]y Deleting flash:/manuinfo.txt...OK! IV. Returning to the main menu Select 0 to return to the BootWare main menu. -
Page 44: Bootware Password Loss
Installation Manual H3C LS8M1WCMA0-OVS Access Controller Module Chapter 5 Software Maintenance Note: After reboot, the system runs with the initial default configuration, but the original configuration file is still stored in the Flash. To restore the original configuration, you can use the display saved-configuration command to display it, and then copy and execute it. -
Page 45: Super Password Loss
You can clear the super password by selecting 8 in the BootWare main menu. Select this option, quit the menu, and reboot the LS8M1WCMA0-OVS card, and then you can enter system view directly. This setting is valid for the first reboot of the LS8M1WCMA0-OVS card only. -
Page 46: Chapter 6 Maintenance And Troubleshooting
6.2 Configuration System Failure After the LS8M1WCMA0-OVS card is powered on and the system is normal, the booting information will be displayed on the console terminal. If the configuration system has any faults, illegible characters or nothing will be displayed on the console terminal. - Page 47 Installation Manual H3C LS8M1WCMA0-OVS Access Controller Module Chapter 6 Maintenance and Troubleshooting II. Troubleshooting when illegible characters are displayed on the terminal If illegible characters are displayed at the console terminal, the problem probably lies in the parameter settings on the terminal (such as HyperTerminal). Verify the following...
Need help?
Do you have a question about the LS8M1WCMA0-OVS and is the answer not in the manual?
Questions and answers