Super Password Loss; Backing Up And Restoring Bootware - H3C LS8M1WCMA0-OVS Installation Manual

Access controller module

Hide thumbs Also See for LS8M1WCMA0-OVS:

Table of Contents

Installation Manual

H3C LS8M1WCMA0-OVS Access Controller Module

5.8.3 Super Password Loss

The super password enables you to switch between four super levels. In the case of

super password loss, you cannot perform higher level operations.

You can clear the super password by selecting 8 in the BootWare main menu.

Select this option, quit the menu, and reboot the LS8M1WCMA0-OVS card, and then

you can enter system view directly. This setting is valid for the first reboot of the

LS8M1WCMA0-OVS card only. The super password will be restored after a second

reboot.

Select 7 in the BootWare main menu to enter the BootWare operation submenu. Refer

to section 5.2.2 IV. "BootWare operation submenu" in page 5-7 for details.

Select 1 in this submenu, and the system starts to back up the entire BootWare and

prompts:

Backing BootWare....

Updating the backup Basic BootWare.......Done

Backing Basic BootWare Success!

Updating Back Extend BootWare..........Done

Backing Extend BootWare Success!

Now, the entire BootWare is copied to the Flash.

Select 2 in this submenu to overwrite the BootWare in the system with the backup

BootWare in the Flash:

Restore Basic BootWare

Updating the Norm Basic BootWare..............Done

Restore Basic BootWare Success!

Restore Extend BootWare

Updating Extend BootWare..............Done

Restore Extend BootWare Success!

Chapter 5 Software Maintenance

5-26

Table of Contents