Table of Contents
Advertisement
Installation Manual
H3C LS8M1WCMA0-OVS Access Controller Module
boot device
file name
inet on ethernet (e)
host inet (h)
gateway inet (g)
Note:
When configuring a parameter, you can enter a new value directly, or press Enter to
accept the default coming after the colon. Type the symbol "." to clear the input, "-" to
return to the previous parameter, and "^D" (namely, <Ctrl+D>) to quit from the
parameter configuration interface.
The LS8M1WCMA0-OVS card can use the 10/100 BASE-TX out-of-band
management interface only.
5.5.2 Upgrading an Application Program
Trivial File Transfer Protocol (TFTP), a protocol in TCP/IP protocol suite, is used for
trivial file transfer between client and server. It provides not-so-complex and low-cost
file transfer services. TFTP provides unreliable data transfer services over UDP and
does not provide any access authorization and authentication mechanism. It employs
timeout and retransmission to guarantee the successful delivery of data. The TFTP
software is much smaller than the FTP software in size.
Step 1: Set up an upgrade environment.
: eth0
: wx5002.bin
: 192.168.0.124
: 192.168.0.179
: 192.168.0.1
5-14
Chapter 5 Software Maintenance
Boot device name. Cannot be
changed.
The download file name shall
be consistent with the real
file name, and you need to
designate the download path
in TFTP settings.
Set to be in the same network
with TFTP server. It has
nothing to do with port IP
address of the AC.
IP address of TFTP server.
Gateway IP address. No need
to set.
Advertisement
Table of Contents
