Installation Manual
H3C LS8M1WCMA0-OVS Access Controller Module
Figure 5-4 Re-establish a call connection
Then, press the Enter key, and the system will prompt the current baud rate and return
to the previous menu.
=====================<SERIAL SUB-MENU>=====================
| <1> Download Application Program To SDRAM And Run
| <2> Update Main Application File
| <3> Update Backup Application File
| <4> Update Secure Application File
| <5> Modify Serial Interface Parameter
| <0> Exit To Main Menu
===========================================================
Note:
After you download files to SDRAM or upgrade application programs by changing the
baud rate, restore the baud rate in the HyperTerminal to 9,600 bps in time, so as to
ensure the normal display on the console screen when the system boots or reboots.
5.3.2 Upgrading BootWare
Enter the BootWare main menu and select 7 in the BootWare main menu (refer to
section 5.2.1 "BootWare Main Menu" on page 5-3) to enter the BootWare operation
submenu where you can do all BootWare operations. Refer to section 5.2.2 IV.
BootWare operation submenu" on page 5-7 for details.
The following example shows how to upgrade the full BootWare:
Select 3 in the BootWare operation submenu to modify the baud rate. The system
displays:
=======================<BAUDRATE SET>======================
| Note:Change The HyperTerminal's Baudrate Accordingly,
|
| ------------------<Baudrate Available>------------------|
| <1> 9600(Default)
| <2> 19200
Press 'Enter' to exit with things untouched.
Chapter 5 Software Maintenance
5-10
|
|
|
|
|
|
|
|
|
|