Table of Contents
Advertisement
Installation Manual
H3C LS8M1WCMA0-OVS Access Controller Module
User (192.168.0.2:(none)): guest
the LS8M1WCMA0-OVS
331 Password required for guest
Password:
230 User logged in.
server succeeded.
Now, use the following commands to maintain the LS8M1WCMA0-OVS card. In this
example, the main.bin file on the LS8M1WCMA0-OVS card is copied to the PC.
ftp> binary
to binary
200 Type set to I.
ftp> lcd c:\temp
Local directory now C:\temp.
ftp> get main.bin main.bin
LS8M1WCMA0-OVS
200 Port command okay.
150 Opening BINARY mode data connection for main.bin.
226 Transfer complete.
ftp: 14323376 bytes received in 16.81Seconds 851.87Kbytes/sec.
Use the following command to overwrite the main.bin file on the LS8M1WCMA0-OVS
card.
ftp> put main.bin main.bin
LS8M1WCMA0-OVS
200 Port command okay.
150 Opening BINARY mode data connection for main.bin.
226 Transfer complete.
ftp: 14323376 bytes sent in 8.29Seconds 1727.37Kbytes/sec.
ftp> quit
221 Server closing.
II. Maintaining the LS8M1WCMA0-OVS card acting as the client
You can also maintain the LS8M1WCMA0-OVS file system by setting up an FTP
environment where the LS8M1WCMA0-OVS card serves as a client.
Step 1: Set up a maintenance environment.
card to the PC
with the local backup file.
5-20
Chapter 5 Software Maintenance
Enter the usrname guest on
Enter the password 123456
The
connection
Change the transfer mode
Change the local path
Copy the file from the
Overwrite the file on the
Quit FTP
to
the
Advertisement
Table of Contents
