Figure 5-6 Sending File Dialog Box - H3C LS8M1WCMA0-OVS Installation Manual

Access controller module

Hide thumbs Also See for LS8M1WCMA0-OVS:

Table of Contents

Installation Manual

H3C LS8M1WCMA0-OVS Access Controller Module

Figure 5-6 Sending file dialog box

After the BootWare program file is downloaded, the following information appears on

terminal interface:

Download successfully!

434432 bytes downloaded!

Updating Basic BootWare ? Yes or No (Y/N):Y

Updating Basic BTM

Updating the Norm Basic BootWare......Done

Updating Extend BootWare ? Yes or No (Y/N):Y

Updating Extend BTM

Updating Extend BootWare.......Done

Please change the terminal's speed to 9600 bps. Press 'Enter' key when ready.

Change the baud rate on the console terminal from 115,200 bps to 9,600 bps, and then

reboot the LS8M1WCMA0-OVS card.

Note:

The file name, size and path in the above figure may vary. Check the current

BootWare and application program versions before upgrading.

After you download a file to upgrade BootWare by changing the baud rate, restore

the baud rate in the HyperTerminal to 9,600 bps in time, so as to ensure the normal

display on the console screen when the system boots or reboots.

Chapter 5 Software Maintenance

5-12

Table of Contents