Table of Contents
Advertisement
Installation Manual
H3C LS8M1WCMA0-OVS Access Controller Module
Note:
After reboot, the system runs with the initial default configuration, but the original
configuration file is still stored in the Flash. To restore the original configuration, you
can use the display saved-configuration command to display it, and then copy
and execute it.
If the password is stored in plain text, you can use the display
current-configuration command to see the password in the current configuration.
If you use the set authentication password cipher 123456 command to set a
password, the password is stored in cipher text.
Step 4: Save the new password.
[H3C] save
Note:
Execute the save command after modifying the user password to save the new
password.
5.8.2 BootWare Password Loss
Contact the agent or the technical support personnel to set a new password in the
event of BootWare password loss.
You can modify the BootWare password in the BootWare main menu.
Select 5 in the BootWare main menu to modify the password. The console terminal
displays:
Change password.
Old password:
New password:
Verify:
........Password Set Successfully.
Note:
The password modification fails when the old password is incorrect or the new
password is inconsistent, and the system will exit this operation.
Chapter 5 Software Maintenance
Enter the old password
Enter a new password
Enter the new password again
The new password is set successfully
5-25
Advertisement
Table of Contents
