Installation Manual
H3C LS8M1WCMA0-OVS Access Controller Module
System is starting...
User interface con0 is available.
Press ENTER to get started.
The prompt "Press ENTER to get started" indicates that the automatic startup of the
LS8M1WCMA0-OVS card is completed.
Press <Enter>. The following prompt is displayed:
<H3C>
You can configure the LS8M1WCMA0-OVS card now.
Note:
H3C LS8M1WCMA0-OVS service cards provide various command views. For detailed
information about related configuration commands and command line interfaces, refer
to H3C Access controller Operation Manual and H3C Access controller Command
Manual.
4-6
Chapter 4 Initial Startup