Table of Contents
Advertisement
Installation Manual
H3C LS8M1WCMA0-OVS Access Controller Module
Verifying server file...
Deleting the old file, please wait...
File will be transferred in binary mode
Downloading file from remote tftp server, please wait...\
TFTP:
File downloaded successfully.
If there already exists a startup.cfg file on the LS8M1WCMA0-OVS card, the system
prompts you whether to overwrite it. You can enter Y or N to confirm.
Caution:
When you back up a file, the file will directly overwrite the one with the same name
on the server.
The above operations are performed in user view.
The backup configuration file can be modified by a text editor. You can modify the
configurations by downloading the modified configuration file, and the modification
takes effect after rebooting. Alike, you can upgrade the main application file by
downloading a new application file to the LS8M1WCMA0-OVS card to overwrite the
original main application file.
5.6.2 Maintaining the LS8M1WCMA0-OVS Through the FTP Server
I. Maintaining the LS8M1WCMA0-OVS card acting as the server
File Transfer Protocol (FTP) is an application layer protocol in the TCP/IP suite. It is
mainly used for file transfer between remote hosts. FTP provides reliable and
connection-oriented data transfer service over TCP, but does not provide any access
authorization or authentication mechanism.
In the FTP service, the LS8M1WCMA0-OVS card can serve as the FTP server. You can
run the FTP client to log in to the AC to access files.
Install the FTP client application before using FTP. The FTP client application is not
provided with the LS8M1WCMA0-OVS card, and you need to purchase and install it. In
the following example, the FTP client application program is the built-in Windows XP
FTP client:
Step 1: Set up a hardware maintenance environment as follows:
1045 bytes received in 0 second(s)
5-18
Chapter 5 Software Maintenance
Advertisement
Table of Contents
