Table of Contents
Advertisement
Simrad CP60 Installation Manual
Installation summary
Installation of the CP60 system is a demanding task that requires careful preparations, a
number of specific procedures, wiring and required system settings.
Context
An overall installation procedure is provided. This procedure does not describe any
detailed tasks. Refer to the relevant tasks in this manual.
Note
In order to obtain maximum safety and optimal performance, it is very important that the
installation procedures in this manual are complied to. You must do the tasks in the order
they are described. The vessel owner must make sure that the installation shipyard holds
the applicable competence to perform the installation, and that the applicable maritime
authorities are available to verify and certify the installation.
The installation shipyard must provide all necessary design and installation drawings, as
well as the relevant work standards and mounting procedures. If required, all documents
provided by the shipyard for the physical installation of the CP60 system must be
approved by the vessel's national registry and corresponding maritime authority and/or
classification society. Such approval must be obtained before the installation can begin.
The shipowner and shipyard doing the installation are responsible for obtaining and
paying for such approval.
Procedure
1
Determine the physical location of the transducer (or transducers).
Necessary considerations must be taken to avoid acoustic and electric disturbances.
Note
The information in this document must be regarded as general guidelines and
recommendations only. The installation shipyard must design and manufacture
installation hardware to fit the transducer to each individual vessel.
•
Where to install the transducer, page 39
•
Acoustic noise, page 45
2
Install each transducer.
Each transducer will penetrate the hull. For this reason, this is a crucial part of
the installation.
30
Preliminary version 2022-07-26
110-0006927/A (Preliminary)
Advertisement
Table of Contents
