Simrad CP60 Installation Manual
Inputs
Topics
Supported datagram formats for annotation data, page 208
Supported datagram formats for distance information, page 208
Supported datagram formats for drop keel offset information, page 209
Supported datagram formats for GPS (position) information, page 209
Supported datagram formats for heading and gyro information, page 210
Supported datagram formats for trawl information, page 210
Supported datagram formats for motion information, page 211
Supported datagram formats for palette control, page 212
Supported datagram formats for catch monitoring information, page 212
Supported datagram formats for speed log information, page 213
Supported datagram formats for temperature information, page 214
Supported datagram formats for water level offset information, page 214
Supported datagram formats for annotation data
When you study an echogram, it is often useful to add personal comments to it.
Comments can be used to identify specific events such as specific echoes, unusual
bottom conditions, or simply for keeping track of time or distance. You can add
annotations manually, or import information as datagrams using a serial or LAN
(Ethernet) communication port.
The following datagram format is supported:
ATS Annotation
ATS Annotation is a proprietary datagram format created by Kongsberg Maritime.
It allows you to import text annotations from external devices.
Supported datagram formats for distance information
In this maritime context, distance refers to the physical travelled distance the vessel has
made since the sensor was last reset. A suitable external sensor must be provided. A
global positioning system (GPS) with a compatible output format can also be used.
When enabled, the navigational information on the top bar includes
a read-out of the vessel's travelled distance. The following datagram
format is supported:
208
Preliminary version 2022-07-26
110-0006927/A (Preliminary)