Consistency Of Serial Number - CKD AX Series Instruction Manual

１
UNPACKING
3)

Consistency of Serial Number

After unpacking, check that the serial number is uniform among the actuator, driver
and cable.
The serial number label as shown below is put on the actuator unit and on the front
panel of the driver.
CAUTION:
[SMB-14E]
Discontinue
Ｃ Ｋ Ｄ
ＡＢＳＯＤＥＸ
ＭＯＤＥＬ
ＳＥＲＩＡＬ：１２３４５６７
ＣＫＤ Ｃｏｒｐｏｒａｔｉｏｎ
Fig. 1.1 ABSODEX Serial Number Label
[H]
The serial number of the actuator unit must be
the same as that of the driver.
If two or more units of ABSODEX are used, be
careful to keep consistency in the combination.
If the actuator and driver are operated in a
different combination, malfunction and failure
may be caused.
— 1-2 —
：ＡＸ１０２２Ｈ
MADE IN JAPAN