Appendix > Character Entry Method
Character Entry Method
To enter characters for a name, use the on-display keyboard in the touch panel following the steps as explained
below.
NOTE
Keyboard Layout
"QWERTY", "QWERTZ" and "AZERTY" are available as keyboard layouts the same as a PC keyboard. Select the
[System Menu/Counter] key, [Common Settings] and then [Keyboard Layout] to choose the desired layout.
"QWERTY" layout is used here as an example. You may use another layout following the same steps.
Entry Screens
Lower-case Letter Entry Screen
No.
Display/Key
1
Keyboard
2
Input box
3
Tab key
4
Shift key
5
[?123] / [Character]
6
Space key
7
Cursor key
8
Close key
9
Enter key
10
Backspace key
11
Input / Limit display
Select the character to enter.
Enter characters in the selected box.
Select to move to the next input box.
Select to switch between upper case and lower case.
Select the characters that are entered.
Select to insert a space.
Select to move the cursor on the display.
Select to close the entry screen.
Select to finalize entry and return to the screen before the entry.
Select to delete a character to the left of the cursor.
Displays maximum number of characters and the number of characters entered.
11-10
Description