Kyocera ECOSYS MA6000ifx Operation Manual page 396

Setup and Registration (System Menu) > System Menu
Item
ThinPrint Protocol
Settings
Thin Print over
TLS
Available
Network
LPD Protocol
Settings
Available
Network
Raw Protocol
Settings
Available
Network
IPP Protocol
Settings
Available
Network
IPP over TLS Protocol
Settings
Available
Network
Select whether to use ThinPrint. To use the Thin Print protocol, set the protocol to
[On]. The default port number is 4000.
Value: Off, On
NOTE
This function is displayed only when the optional ThinPrint Option is activated.
To use the Thin Print over TLS protocol, set [Thin Print Over TLS] and [TLS] to
[On].
Value: Off, On
NOTE
When selecting [On], it also requires a certificate for TLS. The default certificate is
the self-certificate of the machine.
Command Center RX User Guide
Set whether to enable this function for each network of Wi-Fi Direct, Wi-Fi and
wired.
Value: Disable, Enable
Selects whether to receive documents using LPD.
Value: Off, On
Set whether to enable this function for each network of Wi-Fi Direct, Wi-Fi and
wired.
Value: Disable, Enable
Select whether to receive documents using Raw Port.
Value: Off, On
Set whether to enable this function for each network of Wi-Fi Direct, Wi-Fi and
wired.
Value: Disable, Enable
Selects whether to receive documents using IPP. To use the IPP protocol, set [IPP]
to [On], and set [TLS] to [Off]. In addition, select [Not Secure (IPP&IPPS)] on IPP
Security under Security Settings from the Command Center RX. The default port
*1
number is 631.
Value: Off, On, 1 to 32767 (Port Number)
Set whether to enable this function for each network of Wi-Fi Direct, Wi-Fi and
wired.
Value: Disable, Enable
To use the IPP protocol, set [IPP] and [TLS] to [On]. The default port number is
*1*2
443.
Value: Off, On, 1 to 32767 (Port Number)
NOTE
When selecting [On], it also requires a certificate for TLS. the default certificate is
the self-certificate of the machine.
Command Center RX User Guide
Set whether to enable this function for each network of Wi-Fi Direct, Wi-Fi and
wired.
Value: Disable, Enable
8-47
Description
*1*2
*1
*1