Kyocera ECOSYS MA6000ifx Operation Manual page 502

Troubleshooting > Troubleshooting
Error
Code
1105 Failed to send via SMB.
Failed to send the e-mail.
Failed to send via FTP.
1106 Failed to send the e-mail.
1131 Failed to send via FTP.
1132 Failed to send the e-mail.
Failed to send via FTP.
1133 Job is canceled. Press [End].
1134 Job is canceled. Press [End].
Message
Check the following settings.
[Home] key > [...] > [System Menu] > [Network
Settings] > " Network Settings" [Protocol
Settings] > [SMB Client (Send)]
Select [On] of the SMTP settings on the Command
Center RX.
Check the following settings.
[Home] key > [...] > [System Menu] > [Network
Settings] > " Network Settings" [Protocol
Settings]
Check the sender address of SMTP on the
Command Center RX.
Enable the SSL.
[Home] key > [...] > [System Menu] > [Network
Settings] > " Network Settings" [Protocol
Settings]
Check the following of the SMTP server.
•
•
Check the following of the FTP server.
•
•
Server certificate has expired.
Check the network and FTP settings.
•
•
Check the network and Command Center RX.
•
Corrective Actions
> [FTP Client (Send)]
> [FTP Client (Send)]
Is SMTP over SSL available?
Is the encryption available?
Is FTPS available?
Is the encryption available?
Check time/date setting of the machine.
Make sure server is using a valid certificate.
Network Settings : Protocol, FTP
Client(Transimssion):Hash
10-37
Reference
Page
page 8-46
page 2-75
page 8-46
page 2-75
page 8-46
Refer to the
Command
Center RX
User Guide.
—
—
—