Kyocera ECOSYS MA6000ifx Operation Manual page 499

Troubleshooting > Troubleshooting
U
Message
USB Drive error.
USB Drive is full.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time
elapses.
Auto Error Clear (page 8-20)
W
Message
Warning for high
temperature. Adjust
the room temperature.
Warning for low
temperature. Adjust
the room temperature.
Warning low memory.
Waste toner box is
full.
Checkpoints
*1
Is writing to a USB drive
prohibited?
―
*1
―
Checkpoints
―
—
—
Is the waste toner box full?
Corrective Actions
An error occurred in the USB
drive. The job stopped. Select
[End].
The error cord is as follows.
01: Connect a USB drive that
can be written to.
An error occurred in the USB
drive. The job stopped. Select
[End].
The error cord is as follows.
01: The amount of data that can
be saved at once has been
exceeded. Restart the system or
turn the power OFF/ON. If the
error still occurs, the USB drive
is not compatible with the
machine. Use the USB drive
formatted by this machine. If the
USB drive cannot be formatted,
it is damaged. Connect a
compatible USB drive.
The job is canceled. Select
[End].
Insufficient free space in the
USB drive. Delete unneeded
files.
Corrective Actions
Print quality may be
deteriorated. Adjust the
temperature and the humidity of
your room.
Print quality may be
deteriorated. Adjust the
temperature and the humidity of
your room.
Cannot start the job. Try again
later.
Replace the waste toner box.
10-34
Reference
Page
―
page 5-57
―
Reference
Page
―
—
—
page 10-11