Kyocera ECOSYS MA6000ifx Operation Manual page 392

Setup and Registration (System Menu) > System Menu
Item
IPv6 Settings
IPv6
Manual Setting
RA (Stateless)
DHCP
DNS Server Address
DNS over TLS
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Set up TCP/IP (IPv6) to connect to the network. This setting is available when [TCP/IP] is
[On].
Select whether to use IPv6.
Value: Off, On
NOTE
Selecting [On] displays IP address in [IP Addr. (Link Local)] after restarting the network.
Manually specify the IP address, prefix length, and gateway address of TCP/IP (IPv6).
Value
IP Address (Manual): 128-bits address is expressed in eight groups consisting of four-
digit hexadecimal digits. The groups are separated by colon (:).
Prefix Length: 0 to 128
Default Gateway: 128-bits address is expressed in eight groups consisting of four-digit
hexadecimal digits. The groups are separated by colon (:).
NOTE
This function is displayed when [IPv6] is set to [On].
To enter "Default Gateway", set [RA (Stateless)] to [Off].
Select whether to use RA (Stateless).
Value: Off, On
NOTE
This function is displayed when [IPv6] is set to [On].
Selecting [On] displays IP address in [IP Address (Stateless)] after restarting the
network.
Select whether to use the DHCP (IPv6) server.
Value: Off, On
NOTE
This function is displayed when [IPv6] is set to [On].
Selecting [On] displays IP address in [IP Address (Stateful)] after restarting the network.
Set the IP address of DNS (Domain Name System) server.
Value: Use DNS Server from DHCP, Use following DNS Server
NOTE
When [Use following DNS Server] is selected, you can enter static DNS server
information in the Primary and Secondary fields provided.
Set whether to connect to a DNS server during communication protected by TLS.
Value: Off, On, Auto
8-43
Description