Table of Contents
Advertisement
Setup and Registration (System Menu) > System Menu
Item
Push Button Method
PIN Code Method
(Device)
Custom Setup
Network
Name (SSID)
Network
Authentication
Encryption
If the access point supports the push button method, wireless settings can be configured using
the push button. This setting executes push button, and the connection is started by pressing
the push button on the access point.
NOTE
The push button method supports only the WPS.
Starts connection using the machine's PIN code. Enter the PIN code into the access point. The
PIN code of the machine is automatically generated.
The detailed settings for wireless LAN can be changed.
Set the SSID (Service Set Identifier) of the wireless LAN to which the machine connects.
NOTE
Up to 32 characters can be entered.
Select network authentication type.
Value: Open, WPA2/WPA-PSK, WPA2-PSK, WPA2/WPA-EAP, WPA2-EAP,
WPA3-SAE/WPA2-PSK, WPA3-SAE, WPA3/WPA2-EAP, WPA3-EAP
Select encryption method. The setting values vary depending on the Network Authentication
setting.
Value
WPA2/WPA-PSK
AES, Auto, Preshared Key (Up to 64 characters)
WPA2-PSK
Preshared Key (Up to 64 characters)
WPA2/WPA-EAP
AES, Auto
WPA2-EAP
—
WPA3-SAE/WPA2-PSK
Preshared Key
WPA3-SAE
Preshared Key
WPA3/WPA2-EAP
—
WPA3-EAP
—
Description
8-41
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
