Table of Contents
Advertisement
Setup and Registration (System Menu) > System Menu
Device Status Notification
[Home] key > [...] > [System Menu] > [Notification/Report] > "Device Status Notification"
Item
Low Toner Alert
Periodic Inspection
Notification
Fax Communication Report
[Home] key > [...] > [System Menu] > [Notification/Report] > "Fax Communication Report"
Configure settings for Outgoing Fax report and Incoming Fax report.
FAX Operation Guide
Notify via Operation
Panel
Notify Externally
(for admin. use)
Low Toner Alert (page 8-20)
Set whether or not to display on the operation panel when a periodic
inspection is near.
Value
Off, Status Display, Status and Error Display
Set the timing at which the administrator will be notified of the
period remaining before the upcoming scheduled inspection when it
is near.
This notification is used for Event Reports, Status Monitors, and
SNMPTraps (such as Printing Equipment Management Systems) .
Value
Off, On
NOTE
If [On] is selected, set the alert timing. The setting range is 5 to 100%
(in 1% increments) .
8-23
Description
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
