Kyocera ECOSYS MA6000ifx Operation Manual page 496

Troubleshooting > Troubleshooting
R
Message
Regulating the
temperature...
Remove originals in
the document
processor.
Replace all originals
and press [Continue].
Running security
function...
S
Message
Scanner memory is
*1
full.
Scheduled sending
jobs exceeded.
Select another
cassette.
*1
Send Error.
Skewed originals or
multi originals fed at
once.
Checkpoints
―
Are there any originals left in the
document processor?
—
—
Checkpoints
—
—
Is the cassette you selected
correct?
—
—
10-31
Corrective Actions
The machine is under the
adjustment to maintain its
quality. Please wait.
Remove originals from the
document processor.
Remove originals from the
document processor, put them
back in their original order, and
place them again. Select
[Continue] to resume printing.
Select [Cancel] to cancel the
job.
Running security function.
Please wait.
Corrective Actions
Scanning cannot be performed
due to insufficient memory of the
scanner. Follow the instructions
on the screen.
The number of jobs has
exceeded the limit set for
delayed transmission. Select
[End]. The job is canceled.
Wait until the delayed
transmission is executed, or
cancel the delayed transmission
and then perform the job again.
The specified cassette is a fax
special stage.
Select another valid cassette.
Select [Continue] to print.
An error has occurred during
transmission. The job is
canceled. Select [End]. Refer to
Responding to Send Error for
the error code and corrective
actions.
See the caution attached on the
document processor and check
the originals. If the originals are
jammed, follow the instructions
on the screen to remove the
originals.
Reference
Page
―
―
—
—
Reference
Page
—
—
—
page 10-36
page 10-44