Table of Contents
Advertisement
Setup and Registration (System Menu) > System Menu
TCP/IP Setting
Item
TCP/IP
IPv4 Settings
DHCP
Auto-IP
IP Address
Subnet Mask
Default Gateway
DNS Server Address
DNS over TLS
IMPORTANT
• When setting the Auto-IP, enter "0.0.0.0" in [IP Address].
• After changing the setting, restart the network or turn the machine OFF and then ON.
Select whether to use TCP/IP Protocol.
Value: Off, On
Set up TCP/IP (IPv4) to connect to the network. This setting is available when [TCP/IP] is
set to [On].
Select whether to use the DHCP (IPv4) server.
Value: Off, On
Select whether to use Auto-IP.
Value: Off, On
Set the IP address.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], the value cannot be entered.
Set the IP subnet mask.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], the value cannot be entered.
Set the IP gateway address.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], the value cannot be entered.
Set the IP address of DNS (Domain Name System) server.
Value: Use DNS Server from DHCP, Use following DNS Server
NOTE
When [Use following DNS Server] is selected, you can enter static DNS server
information in the Primary and Secondary fields provided.
Set whether to connect to a DNS server during communication protected by TLS.
Value: Off, On, Auto
8-42
Description
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
