Displaying Radio Text (Rt); Performing A Pty Scan; Performing A Tp Scan - Onkyo TX-NR801 Instruction Manual

Listening to RDS Broadcasts (European models only)—Continued
RT/PTY/TP TUNER
DIRECT / PURE AUDIO STEREO SURROUND THX DSP

Displaying Radio Text (RT)

If the station you are currently tuned into is broadcasting
RT signals, they will be displayed in the front display on
the TX-NR801E. If the station does not, this function
will be ignored.
To display the radio text, press the
RT/PTY/TP
RT/PTY/TP button once.
• If the current station you are listening to is not an RDS
station, only the frequency of the station will appear.
• If "Waiting" appears on the display, more time is
required to receive the RT information. When the
information is received, the characters will scroll
across the front display.
• If "No Text Data" appears on the display, RT informa-
tion is not available.
• The display shows the frequency for 3 seconds and
returns to program service name.

Performing a PTY Scan

1 Press the TUNER input source but-
ton and select the FM input
TUNER
source.
2
Press the RT/PTY/TP button twice.
The current program type appears on the
RT/PTY/TP
display.
3
Using the PRESET
select the PTY program type you
desire.
TUNI NG
PRESET
ENTER
SETUP
TUNING
ENTER
RE TURN
PRESET
MEMORY FM MODE A-FO RM LISTENING MODE MEMORY
PRESET /
/ buttons,
4
Press the ENTER button.
The TX-NR801E will scan until it
ENTER
reaches a station of the program type you
selected. It will then stop briefly at that
station before continuing on until it
reaches the next station. Pressing the
ENTER button stops the PTY scan at that
point. If you press the RT/PTY/TP while
"NONE" is displayed, "PTY ?" will
appear. In this case, return to step 3.
5
Press the ENTER button when it
reaches the station that you want
to listen to.
ENTER
"Not Found" will appear when no RDS
signal is being received from the station.

Performing a TP Scan

1 Press the TUNER input source but-
ton.
TUNER
2
Press the RT/PTY/TP button three
times.
RT/PTY/TP
"[TP]" will appear if the current station
is broadcasting TP signals. This station
will periodically broadcast traffic infor-
mation. To find a different station, pro-
ceed to the next step. Also, if "TP" is
displayed, proceed to the next step.
3
Press the ENTER button.
The TX-NR801E will scan until it
ENTER
reaches a station broadcasting traffic
information. If "Not Found" appears on
the display, a TP station cannot be
located.
49