Operating Other Manufacturers' Devices - Onkyo TX-NR801 Instruction Manual

Operating Other Manufacturers' Devices Using the Remote Controller—
Continued
Operating Other Manufacturers'
Devices
After entering a pre-programming by following the
procedure given above, the following modes become
enabled for use.
MODE buttons
Turns on and off satellite tuner unit (same as STANDBY
ON
button on the remote controller)
Changes selected preset channel
CH
/ / / Moves cursor
ENTER Confirms selection
MENU Displays menu
0, 1 to 9 Numeric keys
ENTER Confirm
VOL
MUTING
84
SAT MODE
ON STANDBY
ENTER SAT/MD MODE
/ / /
VOL
CH
MENU
MUTING
Numeric keys
ENTER
Adjusts the volume at the TX-NR801/TX-NR801E
Activates the muting function at the TX-NR801/TX-NR801E
1
Press the MODE button.
• When operating the satellite tuner unit, press
the SAT/MD MODE button.
• When operating the cable TV unit, press the
CABLE MODE button.
• When operating the VCR, press the VCR
MODE button.
• When operating the television, press the TV
MODE button.
• When operating the DVD player, press the
DVD MODE button. The buttons you can use
for operation are same as the ones described on
page 80.
2 Point the remote controller at the compo-
nent and press the desired operation but-
ton.
CABLE MODE
ON
CH
Turns on and off cable TV unit (same as STANDBY button
on the remote controller)
Changes selected preset channel
Numeric keys
Confirm
STANDBY
CABLE MODE
VOL
MUTING
Numeric keys
ENTER